Roland HP203 - Manual (Page 72)

70
Various Settings
You can change the volume of the damper pedal resonance.
On an acoustic piano, depressing the damper pedal makes
the notes you play resonate with other strings, adding rich
reverberations and fatness to the sound. The damper pedal on
the HP203 recreates this resonance (Damper Resonance)
when depressed.
1. Hold down the [Brilliance] button and press
the [3D] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2. Press the [Strings] button.
The display will indicate “rES” and then the value of the
setting will appear.
3. Use the [-] [+] buttons to change the setting.
When you play the keys on an acoustic piano, the strings that
are already playing resonate as well. The function that
reproduces this effect is called “String Resonance.”
1. Hold down the [Brilliance] button and press
the [3D] button.
The display will indicate “Fnc” and you’ll be in Function mode.
2. Press the [Voice] button.
The display will indicate “rSt” and then the value of the
setting will appear.
3. Use the [-] [+] buttons to change the setting.
You can play the “key off” sound (the subtle sound produced
when the keys are released) obtained when playing an
acoustic piano.
1. Hold down the [Brilliance] button and press
the [3D] button.
The display will indicate “Fnc” and you’ll be in Function mode.
2. Press the [Others] button.
The display will indicate “rOF” and then the value of the
setting will appear.
3. Use the [-] [+] buttons to change the setting.
Sound-related Settings
Producing Sympathetic Resonance
When You Press the Damper Pedal
(Damper Resonance)
Setting Explanation
OFF, 1–10
The resonance volume decreases as the value
is lowered, while raising the value increases
the volume of the Damper Resonance.
The Damper Resonance function is not active
when the value is set to “OFF.”
Producing the Resonance of the Strings
When the Keys Are Played
(String Resonance)
Setting Explanation
OFF, 1–10
The resonance level decreases as the value is
decreased, while increasing the value
increases the amount of resonance.
The String Resonance function is not active
when the value is set to “OFF.”
Playing Sounds When the Keys Are
Released (Key Off Resonance)
Setting Explanation
OFF, 1–10
The volume of the Key Off sound decreases as
the value is lowered, while raising the value
increases the volume of the Key Off sound.
The Key Off Resonance function is not active
when the value is set to “OFF.”
HP203_e.book 70 ページ ２００７年７月１７日 火曜日 午前１０時４６分