Roland HP203 - Manual (Page 81)

79
Various Settings
The settings you’ve changed in Function mode can be restored
to their factory-set condition. This operation is called “Factory
Reset.”
Execute this operation if you want the settings you’ve stored
using Memory Backup to be returned to their original state.
When you execute “Factory Reset,” all settings
you’ve stored up to that point will be cleared, and
reset to their factory-set condition.
Executing this operation will not erase the songs
from internal memory or USB memory.
If you want to erase all songs from the HP203‘s
internal memory and all songs from USB memory,
refer to “Initializing the Memory” (p. 58).
1. Hold down the [Brilliance] button and press
the [3D] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
fig.d-Fnc.eps
2. Press the [Right] button.
The display will indicate “Fct” and the [ ] button
will blink.
3. Press the [ ] button.
The display will indicate “Sur,” and the [ ] button
and [ ] button will blink.
If you decide not to execute the Factory Reset, press the
[
] button.
4. To execute the Factory Reset, press the [ ]
button.
Never turn off the power while “Fct” is blinking in
the display.
When the Factory Reset has been completed, the
following display will appear.
5. Turn the [Volume] knob all the way toward the
left to minimize the volume.
6. Switch the power off, then back on.
If you activate the Panel Lock function, all buttons will be
locked and non-functional. You can use this to prevent a child
from accidentally changing the settings by inadvertently
pressing buttons.
1. Press the [Brilliance] button and [Key Touch]
button simultaneously.
Panel Lock will be activated.
All buttons will be disabled.
The following screen appears when Panel Lock is in
force.
* Pressing buttons during playback or recording of a song stops the
playback or recording.
Canceling the Panel Lock function
Once again, press the [ Brilliance ] button and [ Key Touch ]
button simultaneously.
Panel Lock will be cancelled when you turn off the
power.
Restoring the Settings to the
Factory Condition (Factory
Reset)
NOTE
NOTE
Disabling the Buttons (Panel
Lock)
HP203_e.book 79 ページ ２００７年７月１７日 火曜日 午前１０時４６分