Device through the hp203’s speakers (p. 81) – Roland HP203 User Manual
Page 83
81
Connecting to Other Devices
1.
Turn the volume all the way down on the
HP203 and on the audio device you’re about
to connect.
2.
Turn off the power to the HP203 and
connected audio device.
3.
Use audio cables (sold separately) to make the
connection.
4.
Switch on the connected audio device.
5.
Switch on the HP203.
6.
Adjust the volume level on the HP203 and the
connected audio device.
The sounds from the connected audio device are played
by the HP203.
Adjust the volume by using the controls of your
audio device.
Turning Off the Power
1.
Turn the volume all the way down on the
HP203 and on the audio device you’re about
to connect.
2.
Turn off the HP203.
3.
Turn off the connected audio device.
Playing Sounds of an Audio Device through the HP203
Input jacks
Audio System, etc.
Output (Line Out)
RCA pin-type Input jacks are
located to the lower right of
the front of the HP203.
They provide a convenient
way to connect portable
audio devices.
HP203_e.book 81 ページ ２００７年７月１７日 火曜日 午前１０時４６分