Ricoh GX8 - Manual (Page 122)

120
Setting the Date and Time
(DATE SETTINGS)
You can take still images with the time or date stamped onto the
picture.
The date/time setting on the SETUP menu is explained here.
1.
Turn the Mode Dial to 1.
2.
Press the " button to select
[DATE SETTINGS] and then press
the O or $ button.
3.
Set the year, month, date and time
by pressing !"#$.
If you hold down the !" buttons, you
can increase/decrease the value quickly.
4.
In [FORMAT], choose the Date and
Time format.
5.
Check the display on the bottom of
the screen and then press the O
button.
Once you have set the date and time,
the display returns to the Setup screen.
Note
If the batteries are removed for more than one week, the date and time settings will be lost.
These settings must be made again.