Ricoh GX8 - Manual (Page 172)

170
K. Error Messages
If an error message is displayed on the LCD Monitor, take the
corresponding action.
Error Message Cause and Action Page
INSERT CARD No card is loaded. Insert a card. P.25
SET DATE The date is not set. Set the date. P.120
FILE NUMBER OVER The file number limit has been exceeded. Please use
another card, or delete unwanted files. P.118
UNMATCHED FILE The camera cannot display this file. Check the file contents
on your computer, and then delete the file. -
INSUFFICIENT MEMORY.
CONTINUE? Because there is not sufficient capacity on the card, all the
files cannot be copied. Use another card. P.24
PROTECTED You are trying to delete a protected file. P.100
THE CARD IS WRITE-
PROTECTED. The card is “Locked (write-protection)”. Unlock the card. P.24
PRINT SETTINGS CANNOT BE
SET FOR THIS FILE This file (movies and other) cannot be selected for printing. -
INSUFFICIENT MEMORY Files cannot be stored. Make sure there is enough free
space, or delete files. P.51,
P.111,
P.112
The image print number limit has been exceeded. Select an
image and set the number to 0. -
FORMAT INTERNAL MEMORY It is necessary to format internal memory. P.112
FORMAT CARD The card is not formatted.Format the card. P.111
CARD ERROR Please reformat. If, after doing so, the error message still
appears, the card may be faulty. Do not use the card. P.111
WRITE TO CARD Writing file to memory. Wait until writing finishes. -
NO FILE There are no files that can be played back. -
CANNOT RECORD The Number of remaining shots is 0. Switch to another card
or internal memory. -