Raymarine DSM300 - Manual (Page 27)

Chapter 3: System Setup 27
Data Boxes
Press the SELECT BOXES soft key to display the data box sub-menu. This enables
you to select up to 6 data boxes that you can display on the sounder.
Notes: (1) A fixed set of sixteen (nine in the monochrome displays) of these data
items are available for display in the Nav Data half-screen window.
(2) In addition to these grouped data boxes, boxes for the cursor readout,
VRM/EBL data, waypoint data, MOB data and simulator status are
displayed when selected or when the appropriate function is active.
(3) Radar data is available only if radar equipment is installed and connected.
Data boxes provide regularly used data in a compact form so that most of the
graphics can still be seen. The ones you select here can be turned on and off as a
group during normal operation, and you can also move them around the screen
individually using the context-sensitive cursor. See “Viewing Data Boxes” on
page 50.
Bearing Mode
The mode (magnetic or true) of all the bearing and heading data displayed. This is
indicated in the radar status bar after the heading value, if displayed.
TIME FORMAT 12 HOUR or 24 HOUR 12 HOUR
TIME OFFSET UTC, or local offset value:
Plus or minus up to 12 hours, in
whole hours UTC
GPS SOG/COG FILTER HIGH, MEDIUM, or LOW
COMPASS SET UP LINEARISE COMPASS or
ALIGN HEADING
LANGUAGE English (UK), English (US), Dan-
ish, French, German, Dutch,
Icelandic, Italian, Norwegian,
Portuguese, Spanish, Swedish,
or Finnish English (US)
SIMULATOR OFF, DATA, RADAR, or BOTH OFF
Table 3-1: System Set Up Parameters
Menu Options
Factory
Default New
Setting