Rimage EverestTM Printer - Manual (Page 12)

Rimage Everest Printer
6 110632_L
Mode switch
Everest printer switches
There are two switches on the
rear of the Everest printer: the
mode switch and the AC voltage
switch.
Voltage switch
Mode switch
-
Important! You must power off the Everest printer before changing the mode switch.
The mode switch is a rotary switch used to set the operational mode of the Everest printer. The
printer must be powered off for the mode to be changed. After changing the mode, the printer
must be powered on again to recognize the change. The recessed line on the switch indicates the
selected mode.
-
Important: The mode switch must be set to match your equipment type.
Switch Position Mode Mode Switch
0 Everest standalone
1 Rimage autoloader
2 AutoPrinter
3 Diagnostic
4 Firmware update
5 – 9 Reserved
AC voltage switch
The AC voltage switch is used to select the AC voltage of the power outlet.
n
Warning! Set the AC voltage switch to match the AC voltage of the AC power outlet!