REL Acoustics Strata 5 - Manual (Page 10)

REL Acoustics ST 5 User Manual
10
ADDITIONAL FUNCTIONS
(Only available via the encoder on main control panel)
Display Time Out. Enables the display to be
turned off after a pre-set time or left on
continually.
- - indicates ‘always on’ or select 1 to 59 seconds
for display off. Select by pressing the control
knob until ‘dt’ appears on the two left hand digits,
rotate knob to set value as displayed on the two
right hand digits.
Display Brightness. Adjusts the display
brightness from 01 ‘dim’ to 10 ‘full brightness’.
Select by pressing the control knob until 'br'
appears on the two left hand digits, rotate knob to
set value as displayed on the two right hand digits.
DC TRIGGER. Custom install feature. Used for
remote control of sub by other equipment.
Select by pressing the control knob until ‘tr’
appears on the two left hand digits. Rotate knob to
select value Hi or Lo. Please consult your dealer
on use of this feature.
Use this function to lock the control panel encoder, this will
prevent user settings being changed accidentally.
Press MEMORY and then LFE MUTE buttons, display will
read FP on or FP oF. FP on means front panel control active,
FP oF means front panel control locked.
Pressing the standby button on the remote control switches the
sub bass unit in or out of standby mode.
Press the STANDBY button and the display will read Stby
briefly and then default to just four flashing dots. Another press
of the STANDBY button will bring it back to life.