REL Acoustics Strata 5 - Manual (Page 9)

REL Acoustics ST 5 User Manual
9
CONTROL PANEL DISPLAY
The following options are available via the remote control and the encoder on the control panel.
LFE input volume. Select by pressing LFE + or – buttons
on the remote control or pressing the control knob on the
control panel until ‘LF’ shows on the display.
Adjust level by pressing the + or – buttons on the remote
control or rotating the control knob on the control panel.
Level will show in the range 00 to 99
High Level input volume. Select by pressing + or –
buttons on the remote control or by pressing the control
knob on the control panel until ‘Hi’ shows on the display.
Adjust level by pressing the + or – buttons on the remote
control or by rotating the control knob on the control panel.
Level will show in the range 00 to 99
Frequency. Select the roll-off frequency by pressing the +
or – buttons on the remote control or by pressing the
control knob on the control panel until ‘Fr’ shows on
display.
Adjust cut-off point by pressing the + or – buttons on the
remote control or by rotating the control knob on the control
panel.
Slam/Depth. Select the Slam/Depth option by pressing the
+ or – buttons on the remote control or by pressing the
control knob on the control panel until ‘Sd’ appears on
display.
Adjust level of Slam/Depth by pressing the + or – buttons
on the remote or by rotating the control knob on the control
panel.
LFE MUTE. Select the LFE MUTE option by pressing the
LFE mute button on the remote control or by pressing the
control knob on the control panel until LF appears on the
display.
Change the state to on or off by pressing the LFE MUTE
button on the remote control again or rotating the control
knob, the display will read LF on or LF oF.
Phase. Phase is selected by pressing the button labelled
PHASE on the remote control, display will read Ph 0 or Ph
18 representing 0 degrees or 180 degrees.
Phase can also be selected by pressing the knob on the
control panel until Ph is displayed, the 0 degrees or 180
degrees is selected by rotating the control knob.
MEMORY. This function is only available via the remote
control.
For operation see pages 7 and 8