Russound CAV6.6 - Manual (Page 33)

33
The CAV6.6 has six Zone Audio/Video outputs.
The Variable Audio outputs can be used if addi-
tional amplification is desired (e.g., Russound
R235LS two-channel amplifier). The Zone
Audio/Video Outputs are located slightly to the
left of center on the rear of the CAV6.6. Use quality RCA signal cables to ensure a con-
stant quality Audio signal. Video for the zone will
be routed via the Video connection.
Use RG59 Coax Cable or an RG6 Cable with 95%
copper braided shield and solid copper core up to
150 feet long for video connections to monitors.
INSTALLER
MAKING CONNECTIONS
Zone Audio (to Amp) and Video Outputs