Russound CAV6.6 - Manual (Page 45)

2. Number of Sources (# of Sources/SOURCE SETUP) (Page 56)
This procedure sets the number of sources used in the system. This prevents the user from selecting
a source input that is not used.
3. Basic Setup (SOURCE SETUP) (Page 50)
This procedure is mandatory to set up each source for keypad source control and is the cornerstone
of the programming process.
4. Learn IR (Page 59)
This procedure is used when the source-specific IR code is not found in the built-in IR code library.
This allows IR commands to be learned into the system and centrally stored.
5. Macro Editor (Page 60)
This procedure compiles multiple IR codes to be initiated by a single button press. One macro can
have up to 10 commands, including other macros, and up to 132 macros can be entered.
6. Source Volume Trim (SOURCE SETUP) (Page 53)
This procedure matches audio output signals for all sources for seamless switching.
7. Numeric IR (SOURCE SETUP) (Page 53)
This procedure sets up control of a source that supports direct numeric commands.
8. Key Configuration (SOURCE SETUP) (Page 51)
This procedure customizes individual key functions on a per-zone basis for source control.
9. Power Management (Page 57)
This function incorporates IR macro commands to automatically control the power state of the sources
when the system is in use or when a home theater is sharing sources. This advanced feature uses audio
signal monitoring to confirm source power, which provides the user with worry-free operation.
10. Zone Volume Trim (ZONE SETUP) (Page 56)
This procedure limits the maximum volume allowed in a zone, regardless of keypad volume adjust-
ment.
11. System On Enable (SYSON ENABLE/ZONE SETUP) (Page 56)
This feature allows a zone to join or opt out of an “all on” command.
12. Party Enable (ZONE SETUP) (Page 56)
This feature allows a zone to join or opt out of Party Mode participation.
13. Master Enable (ZONE SETUP) (Page 56)
This feature allows a zone the option of becoming a Master keypad in Party Mode.
14. Page Enable (ZONE SETUP) (Page 57)
This feature allows a zone to hear or to block paging.
15. Page Volume (ZONE SETUP) (Page 57)
This feature allows adjustment of the paging volume in a zone.
INSTALLER
PROGRAMMING
System Programming Overview (cont’d)
45