Installer, Installation menu – Russound CAV6.6 User Manual

Page 55

Advertising

INSTALLER

INSTALLATION MENU

Numeric IR (cont’d)

i. MACRO -

Macro loads a series of commands which are processed when

(Macro)

activated.

ii. MACRO ID –

Enter the macro ID number. Menu advances to SAVE CHANGES

(MacID)

(step 13)

e. All Other Selections:

Procedure advances to DEVICE CODE (step 11)

11. DEVICE CODE –

Source component code for IR control.

(DevCd)

12. KEY FUNCTION –

Select a function (Enter, Play, etc.).

(KeyFn)

13. SAVE CHANGES? –

Select “yes” to save the changes.

(Save?)

SRC SEL CMD (SrcSC)

This procedure permits a command to be sent to the source component when the source component
is initially selected.

See Source Setup Menu on Page 50 and Source Select Command & # Of

Sources - Flow Chart on page 66

1. SOURCE NUM –

Select the source number this command will be configured for.

(Src #)

2. COMMAND TYPE –

Select the type of source command (e.g., CD, TV, etc.).

(CmdTp)

a. Selected: Learned IR

Choose Learned IR if the pre-programmed IR code library does

(LrnIR)

not support the source component.

i. LEARNED SRC –

Select the learned source bank to be assigned to the source

(LnSrc)

component. Procedure advances to KEY FUNCTION (step 4)

b. Selected: Unassigned

The source select command is cleared. Procedure advances to

(Unasg)

SAVE CHANGES (step 5)

c. Selected: Default

Default selects the same device type and device code previously

(Deflt)

setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 4)

d. Selected: Macro:

(To build macros, see Macro Editor page 60)