Common problems and how to solve them – Raymarine A60 User Manual
Page 26
26
A60 Installation Manual
Common Problems and How to Solve Them
Problem
Solution
Display is blank
1. Make sure that the power supply cable is sound and
that all connections are tight and free from corrosion.
2. Check relevant fuses.
3. Make sure that Brightness level is not set too low.
“NO DATA SOURCE”
message
The boat’s power system must be capable of delivering at
least 10.8 VDC at 4 amps. Check for:
• Inadequate wire gauge or excessive wire length
• Too many other electronics devices connected on the
same circuit
• Loose connections
• Corroded fuse blocks and fuses
• Low battery charge
“Invalid software: Version
xx.x, Version xx.x required”
Incorrect software version installed. Contact your local
Raymarine dealer or visit the Customer Support section of
raymarine.com.
87081.book Page 26 Wednesday, December 20, 2006 2:43 PM