RocketFish RF-MFH2 - Manual (Page 10)

10 RF-MFH2 3G Mobile Hotspot
Connecting to your hotspot using Wi-Fi
You can connect as many as five Wi-Fi-enabled devices.
To connect to your hotspot using Wi-Fi:
Note: Disconnect your mobile hotspot from the power supply before
starting activation.
Tip:
The default network name (SSID) for your mobile hotspot is Best
Buy Connect xxxx Secure. Your SSID and 11-digit network key are
printed on the back of your hotspot. (The xxxx are the last four
characters of your hotspot’s MAC address.)
1 Press the power button on your hotspot. The power button LED
lights.
2 Use your Wi-Fi manager on your device to connect it to your
hotspot. The settings in your Wi-Fi manager must match your
hotspot settings.
The default network name (SSID) and password for your hotspot
are on the label on the back of the hotspot. The SSID and
password also appear on the Quick Setup Guide.
3 Open your Web browser and enter http://bestbuyconnect.mifi or
http://192.168.1
into the address bar, and press Enter or Return.
4 Follow the directions on the screen.
Disconnecting from the Internet
To disconnect from the Internet:
• In a Web browser, type 192.168.1.1 or bestbuyconnect.mifi into the
address bar, then press Enter or Return. Click Disconnect.
• Open your Wi-Fi manager, then click Disconnect.
• Turn off your hotspot.