RocketFish RF-MFH2 - Manual (Page 8)

8 RF-MFH2 3G Mobile Hotspot
System requirements
• For Wi-Fi connection, a device supporting Wi-Fi 802.11 b/g
• Windows® 7, Windows Vista®, Windows® XP, or Mac OS® X 10.4,
10.5, 10.6
• 40 MB hard drive space
• 128 MB of memory (RAM)
Using your hotspot for the first time
Removing the tab and charging the battery
Before you use your hotspot for the first time, you need to install and
fully charge the battery (at least four hours).
To remove the tab and charge the battery:
1 Turn your mobile hotspot over so the bottom is facing up.
2 Pull the plastic tab under the battery compartment cover out in
the direction of the arrow.
3 Connect the micro USB end of the AC wall charger to the
micro USB port on your hotspot.