Repose R500 - Manual (Page 14)

REPOSE R500 User Guide
Page 13 of 20
Using your Repose Massage Lounger
While positioning your massage lounger
for use, please keep in mind that the leg
rest and backrest will move up and
down.
There must be at least 24 inches of
clearance in front of and 20 inches
behind the massage lounger to prevent
damage to the lounger or any obstacles
that might be in the way.
Lowering and Raising the Backrest
The backrest is raised and lowered using the control panel.
To lower the backrest:
1. Make sure the area behind the backrest is clear of obstacles.
2. Press and hold the lower backrest button on the control panel. Release
the button when the backrest reaches a comfortable position. The
backrest will stop automatically when it reaches the lowest point of travel.
To raise the backrest:
1. While sitting in your lounger, press and hold the raise backrest button.
When the backrest reaches the upright position, it will stop.
Note: Pressing the power button will also raise the backrest and lower the
leg rest while resetting the lounger.