Repose R500 - Manual (Page 17)

REPOSE R500 User Guide
Page 16 of 20
Manual Massage
For a manual massage, you can use the Roll
, Knead , or Knock
buttons to turn on and off the selected massage modes or setup a combination of
modes.
To create your own massage program:
1. Sit in your lounger and press the power button.
2. Wait for the body scan to complete.
3. Press Stop to put the lounger in standby mode.
4. Select any massage mode such as Roll , Knead , Knock , or
Vibe.
To use combined massage modes, select the corresponding button.
1. To use Roll and Knead, press the button.
2. To use Roll and Knock, press the button.
3. To use Knead and Knock, press the button.
Speed
The speed of the massage action is variable only during manual massages. You
can adjust the speed in five increments by pressing the plus and minus button
that corresponds with the massage mode you wish to adjust. The default
setting is medium.
Intensity
The intensity of the leg and foot massage is variable only during manual
massages. You can adjust the intensity by pressing the plus and minus button
located below Leg & Foot Intensity.
Width
During the Knock massage mode, the width of the rollers can be adjusted by
pressing the left and right ends of the position adjustment button.