Rinnai RHFE-431FA - Manual (Page 16)

– 14 –
INSTALLATION INSTRUCTIONS
Flue Manifold 1
Back Spacer
Set
Flue Locking
Clamp
Flue Lock
Stopper
Insulation
Clip
Hose Clip
Plastic tie
for air inlet
(M4 20)
For Flue Lock Stopper
For Flue Manifold
Wall Bracket Screws
(M4)
(M4.8 32)
Wood Screws
1
1
1
1
2
1
1
3
5
1
1
6
2
Air Filter
(M4)
For Back Spacer Set
For Air Intake Clip
(M4)
Customers operating
information and
Installation Instructions
Spare rubber seal
1
(‘A’ Flue units only)
(For weatherboard installations)
Check to ensure gas supply matches that of the appliance.
Refer to local gas authority for confirmation of gas type if in doubt.
Refer to data plate located inside of the front panel.
Check for damage, if the unit is damaged contact your supplier or Rinnai.
Do not install a damaged unit before checking with your supplier.
Refer to an approved pipe sizing chart if in doubt about size of gas line.
Wall Bracket Spacer Bracket 1 1