Roland AR-200 - Manual (Page 46)

46
Synchronized Recording and Playback with Multiple AR Units (AR-LINK)
AR-200 Settings
Selecting the AR-200’s Operation (AR-
LINK SLAVE)
Set the AR-2000 so as to enable synchronization with AR-
LINK.
The AR-200 can only be set to AR-LINK slave.
Settings Procedure
1. Turn off the power of the AR-200.
2. Set the MODE switches on the AR-200’s bottom panel as
shown below.
SW4: ON
3. Turn on the power of the AR-200.
The SLAVE indicator on the front panel lights up.
* Use a pointed object to change the ON/OFF settings of the
MODE switches.
* For more detailed information about synchronized operation
with AR-LINK, refer to the AR-3000 Owner’s Manual.
AR-200_e.book 46 ページ ２００３年７月１４日 月曜日 午後１時１１分