Radio Shack Hi-Power CD+G Karaoke System - Manual (Page 11)

11 CD/CD+G Player Operation
To continuously repeat a single track, press
REPEAT once while the desired track is play-
ing.
5(3($7#4 5(3($7#4 5(3($7#4 5(3($7#4
appears.
To continuously repeat all tracks on the CD/
CD+G, repeatedly press
REPEAT until
5(3($7 5(3($7 5(3($7 5(3($7
$// $// $// $//
appears.
To cancel repeat play during or after play,
press
REPEAT .
5(3($7 5(3($7 5(3($7 5(3($7
disappears. If you
cancel repeat play during play, the CD/
CD+G player resumes normal play.
Random Play
You can set the system to play all tracks on a
loaded CD/CD+G in random order before or
during play.
To set up random play before play, press
RANDOM .
5$1'20 5$1'20 5$1'20 5$1'20
appears and [ ] briefly
flashes, then the first randomly selected
track begins to play and its elapsed play time
appears. The karaoke system plays all tracks
in random order, then automatically stops.
To set up random play during play, press
RANDOM .
5$1'20 5$1'20 5$1'20 5$1'20
appears. After the current
track finishes playing, [ ] briefly flashes,
then the karaoke system randomly selects
the next track and begin to play.
Notes:
• To replay the current track, press
SEARCH/SKIP .
• To play the next random track, press
SEARCH/SKIP .
To stop the CD player at any time during ran-
dom play, press
STOP . The CD/CD+G’s total
number of tracks and playing time appear.
When you press
PLAY/PAUSE again, the sys-
tem resumes normal play.
To cancel random play and resume normal
play, press
RANDOM again.
5$1'20 5$1'20 5$1'20 5$1'20
disap-
pears and the CD/CD+G player resumes
normal play.
PROGRAMMED PLAY
You can program the CD/CD+G player dur-
ing normal or karaoke operation to play up to
30 tracks in any order you choose, and you
can program the same track to play more
than once.
1. Repeatedly press STOP until the system
displays the total number of tracks and
the total playing time.
2. Press PROGRAM .
352* 352* 352* 352*
and
3333 ²²²² 4444
(pro-
gram number) appear and the track
number flashes.
352* 352* 352* 352*
appears until you
erase the programmed sequence.
3. Repeatedly press SEARCH/SKIP or
SEARCH/SKIP to select the desired
track.
4. Press PROGRAM to store the selected
track. The programmed track’s number
flashes, and the total playing time of the
programmed tracks appears.
Note: If you enter the wrong track num-
ber, you can erase the sequence by
pressing
STOP twice. Then start over at
Step 1.
5. Repeat Steps 3 and 4 to program up to
30 tracks.
Note: You cannot store more than 30
tracks. If you try to program a 31st track,
the karaoke system records over the
first programmed track.
6. Press PLAY/PAUSE to play the pro-
grammed tracks. The first track number
appears with the elapsed time of the
track in play.
Notes:
• You cannot use random play to play a
programmed sequence.
• You can repeat or search through
programmed tracks. To repeat the