Cd/cd+g player operation, Singing with another audio source, Using the remote control – Radio Shack Hi-Power CD+G Karaoke System User Manual

Page 9: Playing a cd/cd+g

Advertising
background image

9

CD/CD+G Player Operation

13. To stop a tape, press

STOP/EJECT

on

the deck you are using. Press

STOP/

EJECT

again to open the cassette com-

partment door and remove the tape.

14. Set each microphone’s ON/OFF switch

to OFF, then press

STANDBY

to turn off

the system. STANDBY lights.

SINGING WITH ANOTHER
AUDIO SOURCE

If you connected another audio source or
other audio components, follow these steps
to sing along with that audio source.

1. Press

STANDBY

to turn on the system.

STANDBY turns off.

2. Set

FUNCTION SELECTOR

to

AUX

.

$8;

$8;

$8;

$8;

lights.

3. Turn on the audio source or other com-

ponent.

4. Use the karaoke system’s controls to

adjust the sound.

5. Set each connected microphone’s ON/

OFF switch to ON. Sing directly into the
microphone along with the music.

6. Use

MIC 1 VOLUME

and/or

MIC 2 VOL-

UME

to adjust your voice’s volume.

7. When you finish, set each microphone’s

ON/OFF switch to OFF, press

STANDBY

to turn off the system, then turn off the
audio source or other component.

ˆ

CD/CD+G Player Operation

USING THE REMOTE
CONTROL

The remote control makes it easy to use the
karaoke system while playing a CD/CD+G.
All of the buttons that operate the CD/CD+G
player on the system are duplicated on the
remote. Plus,

MUTE

is only on the remote.

To use the remote control, point it toward
REMOTE SENSOR on the karaoke system
and press the buttons.

Notes:

• Make sure you have a clear path

between the remote control and the sen-
sor.

• Weak batteries or direct sunlight on the

remote sensor reduce the remote con-
trol’s operating range.

PLAYING A CD/CD+G

1. Press

STANDBY

to turn on the system.

STANDBY on the front of the karaoke
system turns off.

2. Set

FUNCTION SELECTOR

to

CD/CDG

.

CD/CD+G lights.

3. Press

OPEN/CLOSE

to open the CD/

CD+G compartment.

4. Place a CD/CD+G in the compartment

tray, label side up.

5. Press

OPEN/CLOSE

again to close the

CD/CD+G compartment. You see the
CD/CD+G’s total number of tracks and
total playing time.

6. If

.$5$2.(

.$5$2.(

.$5$2.(

.$5$2.(

appears, repeatedly press

MODE

until

1250$/

1250$/

1250$/

1250$/

appears.

Advertising