Recording tips, Recording your voice with music, Dubbing a cassette tape – Radio Shack Hi-Power CD+G Karaoke System User Manual

Page 14

Advertising
background image

14

Cassette Deck Operation

RECORDING TIPS

• Tape quality greatly affects the quality of

the recording. We recommend
RadioShack Supertape Extended
Range or Low-Noise Type 1 tape. We
do not recommend long-play cassette
tapes, such as C-120s, because they
are thin and can easily tangle in the cas-
sette mechanism. For low-noise, side-
range recordings, use normal-bias tape.

• Before recording, be sure the tape you

are using has its erase-protection tabs in
place. See “Preventing Accidental Era-
sure” on Page 15.

• Recording automatically stops when the

tape in TAPE 1 reaches the end. To
record on the other side, turn over the
tape.

RECORDING YOUR VOICE
WITH MUSIC

Follow these steps to record your voice
along with music from a tape in TAPE 2, a
CD/CD+G, or an audio source connected to
the system’s AUX INPUT jacks.

1. Load a blank tape, or one that you want

to record over, into TAPE 1, with the side
you want to record on facing you, and
the full reel to the left.

2. Follow Steps 1–10 under “Singing with a

CD/CD+G or Cassette Tape” on Page 8
or Steps 1–6 under “Singing With
Another Audio Source” on Page 9.

3. Press

RECORD

on TAPE 1 to begin

recording.

RECORD

and

PLAY

both locks

down.

Note: Press

PAUSE

on TAPE 1 to tem-

porarily stop recording. Press

PAUSE

again to resume recording.

4. Press

STOP/EJECT

on TAPE 1 to stop

recording.

RECORD

and

PLAY

release.

5. Press

STOP/EJECT

on TAPE 2 or stop

the audio source.

DUBBING A CASSETTE
TAPE

You can dub (copy) any cassette tape on the
karaoke system’s dual cassette decks using
a source tape with the music or sound you
want to copy and a blank or reusable tape to
record on.

Follow these steps to dub from one cassette
tape to another.

1. Turn on the system by pressing

STANDBY

. STANDBY turns off.

2. Set

FUNCTION SELECTOR

to

TAPE

.

TAPE lights.

3. Load the cassette you want to copy into

TAPE 2 with the side you want to record
from facing you.

4. Load a blank tape (or one you want to

record over) into TAPE 1 with the side
you want to record on facing you.

5. Press

PAUSE

then

RECORD

on TAPE 1.

RECORD

and

PLAY

both lock down.

6. Press

PLAY

on TAPE 2 to begin record-

ing.

PAUSE

on TAPE 1 automatically

releases.

Note: You can listen to the tape playing
in TAPE 2 as you copy it. Set

MASTER

VOLUME

to a comfortable level. The vol-

ume setting does not affect the record-
ing level.

7. Press

STOP/EJECT

on TAPE 1 to stop

recording.

RECORD

and

PLAY

release.

8. Press

STOP/EJECT

on TAPE 2 to stop

playing the tape.

Advertising