Rhinotek 1645 - Manual (Page 46)

OPERATION
1640-1645 01/11 Operation Section 4-2
© 2010 Alamo Group Inc.
OPERA
T
ION
RHINO 1640 & 1645 LOADERS
OPERATION INSTRUCTIONS
Your 1640 & 1645 Loaders should now be assembled and inspected for any evidence of defective or damaged
parts before use. Any evidence of damage should be reported to your dealer immediately.
This section of the Operator’s Manual is designed to familiarize, instruct, and educate safe and proper loader
use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in
explaining the operation of 1640 & 1645 loaders and are not necessarily of 1640 & 1645 loaders or exact
tractor. Some pictures may show shields removed for purposes of clarity. NEVER OPERATE this implement
without all shields in place and in good operational condition. The operator must be familiar with the loader
and tractor operation and all associated safety practices before operating the loader and tractor. Proper
operation of the loader, as detailed in this manual, will help ensure years of safe and satisfactory use of the
loader.
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND
IMPLEMENT. If you do not understand any of the instructions, contact your nearest authorized dealer for a
full explanation. Pay close attention to all safety signs and safety messages contained in this manual and
those affixed to the implement and tractor. OPS-U- 0001
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
(SG-2)
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad.
(SG-3)