Radio Shack 6 IN 1 RF REMOTE CONTROL SYSTEM - Manual (Page 11)

Need help? Call 1-800-950-7044!
11
Note: The command keys on the system’s remote
control work the same as the keys on the device’s
original remote control; however, the labeling
might differ slightly.
USING TWO OR MORE SIMILAR
DEVICES
Normally, you us each device key to control one of its
listed devices (see “Operation”). However, if you have
two or more of the same type of device (two TVs, two
VCRs, and so on), you can convert any unused device
key (
TV , CBL , VCR , CD , AUX1 , or AUX 2 ) to control an-
other type of device.
To convert a device key, press SET UP until the red in-
dicator blinks twice, then press 9 9 2 , (the key for the
device you want to control), then (unused device key).
For example, the following key strokes convert an un-
used
CBL key to a second VCR key.
SET UP 9 9 2 VCR CBL
To change the CBL key back to its original function, use
the following sequence of key strokes:
SET UP 9 9 2 CBL CBL
OPERATING THE SYSTEM’S
RF COMMAND CONSOLE
After you set up the system’s remote control, follow
these steps to operate your IR remote-controlled devic-
es from anywhere in your house.
1. Point the front of the command console towards
the device(s) that you want to control.
2. Press the appropriate device key on your sys-
tem’s remote control, then the desired function
keys.
15-1919.fm Page 11 Monday, July 19, 1999 12:34 PM