Radio Shack 6 IN 1 RF REMOTE CONTROL SYSTEM - Manual (Page 2)

Need help? Call 1-800-950-7044!
2
INTRODUCTION
Your Radio Shack 6 in 1 RF Remote Control system
has a remote control and RF command console that
make up a complete home control system, allowing you
to send commands to most IR (infrared) controlled de-
vices from any room in your home, up to 100 feet away.
You can use it to control your TV, VCR, cable box, and
even lights and appliances with Plug ’n Power modules
(not supplied).
The 6 in 1 RF Remote Control is preprogrammed. All
you have to do is tell it which TV, VCR, or other compo-
nent’s remote controls you want to replace (by entering
3-digit codes), and it is automatically ready to operate
most of the same functions as the original remotes.
This manual includes a list of 3-digit manufacturer’s
codes for TVs, VCRs, cable converters, compact disc
players, satellites, and other popular remote controlled
devices.
The 6 in 1 RF Remote Control’s features include:
IR (Infrared) and RF (Radio-Frequency) Commands
— let you use the 6 in 1 RF Remote Control system’s
remote control with the system’s RF command console
to control your IR remote-controlled devices from up to
100 feet away, even through walls.
Reassignable Device Keys — so you can control
more than one of the same type of device.
Fast Search — when you control more than one of the
same type of device, lets you quickly search all pro-
grammed manufacturer’s codes for that type of device
until you find the code for the specific device you want
to use.
Channel Scan — lets you scan through available
channels on your TV, VCR, or cable box, stopping at
each one for about 3 seconds.
© 1995 Tandy Corporation.
All Rights Reserved.
Plug ’n Power and Radio Shack are registered trademarks
used by Tandy Corporation.
15-1919.fm Page 2 Monday, July 19, 1999 12:34 PM