Radio Shack 6 IN 1 RF REMOTE CONTROL SYSTEM - Manual (Page 12)

Need help? Call 1-800-950-7044!
12
SPECIAL FUNCTIONS
Telephone Programming
The telephone programming feature lets you have the
manufacturers’ codes for your remote-controlled devic-
es programmed into your remote control by phone! Just
call 1-800-950-7044 and provide the Customer Service
Representative with information about your IR remote-
controlled devices. The codes are sent over the tele-
phone lines to your remote control.
Note: Your remote control’s telephone programming
feature is designed to work with any telephone that
meets current FCC specifications for hearing aid capa-
bility. However, it might not work with some older cord-
less telephones. For the best performance, we
recommend using a corded phone.
Follow these steps to have your system’s remote con-
trol programmed by phone.
1. Write down the brand name, model number, and
manufacture date (if available) of your TV, VCR,
cable box, or other devices that you want to pro-
gram into your system’s remote control. Have this
information ready when you call the Radio Shack
Customer Service Representative.
Note: If you are unsure of your remote controlled
device’s specific model number or manufacture
date, you can still have your system’s remote con-
trol programmed by phone and then use the sys-
tem’s Fast Search feature to find the specific code
for your device (see “Fast Search”).
2. Call 1-800-950-7044 and tell the Customer Ser-
vice Representative what IR remote-controlled
devices you want to program into your system’s
remote control. Be sure to give the brand name,
model number, and manufacture date (if known)
of all devices you want to have programmed.
3. After providing the brand and model information
to the Customer Service Representative, press
and hold
SET UP until the red indicator blinks
twice, then press PWR .
15-1919.fm Page 12 Monday, July 19, 1999 12:34 PM