Configuring wds, Chapter 2 – RCA TM580 User Manual
Page 42
Chapter 2
Local Network Setup
E-DOC-CTC-20050429-0102 v1.0
34
Configuring WDS
To configure your WDS on the web pages:
1
Go to the SpeedTouch™ web pages.
2
In the menu select Home Network.
3
Click your WLAN.
4
On the top right, click Configure.
5
On the Wireless Access Point page, in the Pick a task... list, click Configure
WDS
.
6
Select WDS Enabled.
7
In the Pick a task... list, click Scan for wireless access points.
8
A warning will be displayed:.
Click OK.
9
The SpeedTouch™ will scan for access points on the same radio channel.
10
Select your repeater in the List of Accessible Access Points and click Apply.
If not already done, set a
fixed
channel and check whether the security
settings (WEP encryption or no encryption) on your SpeedTouch™ are
the same as on the repeater.