RCA VR348 - Manual (Page 21)

19
Recording a Program
Express Recording (XPR)
Express recording lets you record up to four hours without using the timer program feature. The VCR will
turn off automatically at the end of the recording.
VCR
SLP REC
POWER CHANNEL STOP • EJECT
TRACKING
RECORD REW PLAY • PAUSE FWD
RECORD Display showing 30
minutes remaining for
express recording.
Stopping a Recording in Progress
Press and hold STOP on the remote or STOP•EJECT
on the VCR for approximately three seconds.
Each press increases the time Ñ 30 minutes up to four
hours.
The amount of time the VCR will record and REC will
appear in the VCRÕs display panel.
You can increase the amount of recording time by
pressing REC on the remote or RECORD on the VCR.
REC Ch 11
Record Length 0:30
Press REC to set length
Express Display on
TV Screen
Operating Instructions
1. Turn on the VCR.
2. Insert a tape with safety tab in place.
3. Select the channel you want to record.
4. Select the desired recording speed using SPEED on
the remote.
5. Press REC on the remote or RECORD on the VCR
twice to activate XPR recording.
6 . Press REC on the remote or RECORD on the VCR
repeatedly until the amount of recording time for
the program is displayed in the VCRÕs display panel
or on the TV screen.
Press Recording
RECORD Time
0:30 ( 30 Min)
1:00 (1 Hr)
1:30 (1 Hr, 30 Min)
2:00 (2 Hrs)
3:00 (3 Hrs)
4:00 (4 Hrs)
(Normal Recording)