RCA VR348 - Manual (Page 8)

6
Hooking Up the VCR
Connecting Two VCRs for Copying Tapes
RF OUT
ANT. IN
CH.
3 4
AUDIO VIDEO
OUT
IN
Playback VCR
RF Coaxial Cable
(supplied)
Recording VCR
Audio/Video
Cables
RF Coaxial
Cable
or
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
From Antenna, Cable
or Cable Box
RF OUT
ANT. IN
CH.
3 4
AUDIO VIDEO
OUT
IN
Playback VCR (only)
Recording VCR
Audio/Video Cables
Audio/Video
Cables
RF Coaxial Cable
(supplied)
or
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
From Antenna, Cable
or Cable Box
RF OUT
ANT. IN
CH.
3 4
AUDIO VIDEO
OUT
IN
RF OUT
ANT. IN
CH.
3 4
AUDIO VIDEO
OUT
IN
Option A hookup.
Use this hookup for a simple connection which
requires fewer accessories.
1 . Select a hookup from pages 2 through 5
and then modify with this connection.
2 . Set the CH3 CH4 switch on the playback
VCR to either channel 3 or 4.
You will tune the recording VCR to this channel
to receive the signal from the playback VCR.
3 . Connect as shown.
This connection may require additional
accessories not provided.
4 . Plug in power cords of VCRs and TV.
5.
Option B hookup.
Use this hookup for slightly improved copy
quality and more convenient operation Ñ use of
TV•VCR
button not required.
1 . Select a hookup from pages 2 through 5
and then modify with this connection.
2 . Connect as shown.
This connection requires additional accessories
not provided.
If your other VCR is stereo, you may need a
Y-adapter to hear sound from both left and
right channels.
3 . Plug in power cords of VCRs and TV.
4.
You will select the line (audio/video)
input on the recording VCR to receive the
signal from the playback VCR.
Continue to page 7.
Continue to page 7.
B
A
Caution: The unauthorized recording
of satellite broadcasts, television
programs, or other materials may
infringe the rights of others.