Trouble checks – RCA VR348 User Manual

Page 33

Advertising
background image

31

References

Trouble Checks

Trouble

Here's what to try:

Streaks in picture during normal playback

Will not record

Rewind does not operate

VCR Plus+ or timer recording not made
or wrong program recorded

Clock shows incorrect time or date

VCR makes noise when stopped

Will not auto channel search active
channels correctly

Cannot select channels over 69

Cassette with safety tab removed does not start to
play automatically

Displays appear in wrong language

¥ Some snow/streaks are normal during search or stop-action playback.

¥ VCR is in pause mode. Press PAUSE.
¥ Safety tab removed from cassette.
¥ Make sure the line indicator (VID1) is turned off in VCRÕs display panel for

normal recording from the VCRÕs tuner. Press INPUT to turn off the line
indicator.

¥ Tape already rewound.

¥ Wrong PlusCode number entered.
¥ Cable box was not turned on or was tuned to the wrong channel at time

recording was to begin.

¥ Program entered incorrectly (wrong channel or times).
¥ Power interruption. Clock area in display panel will show - -:- -.
¥ Check to see if time and date are correct Ñ including AM/PM.
¥ Check Signal Type: CABLE/ANTENNA feature. See page 8.
¥ Program exceeded tapeÕs length or tape was not rewound beforehand.
¥ VCR was not turned off at the time recording was to start.
¥ No tape in VCR or cassetteÕs safety tab broken off.

¥ Power interruption. Clock on the front panel will show --:--.
¥ Clock was not set accurately (check AM/PM and date).
¥ Time counter display appears in VCRÕs display panel. Press DISPLAY on

remote.

¥ VCR is removing tape from heads. This is normal. The head cylinder inside

the VCR will continue to rotate for a few minutes after you put the VCR in
the stop mode.

¥ Check antenna connections.
¥ Check Signal Type: CABLE/ANTENNA feature. See page 8.

¥ Cable channels over 69 can only be selected if Signal Type:

CABLE/ANTENNA

feature is set to CABLE. Details are on page 8.

¥ Set Auto Play ON/OFF feature to ON. Details are on page 12.

¥ Language feature set incorrectly. Details are on page 9.

Advertising