Roland DIF-AT24 - Manual (Page 10)

10
Connections and settings
Connection
example 2
Connecting the VS-2400CD and a computer
Here's an example of synchronization with computer-based sequencer software or the
VS-2400CD functioning as the master.
Make connections as shown in the diagram. This example uses an ADAT interface and MIDI
interface connected to your computer.
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn
off the power on all devices before making any connections.
VS-2400CD
DIF-AT24
MIDI IN
MIDI IN
R-BUS
R-BUS
USB connector
MIDI OUT
MIDI OUT
ADAT
OUT
ADAT
OPTICAL IN
ADAT IN
ADAT
OPTICAL OUT
Edirol UM-1, etc.
ADAT
interface
PC