Roland DIF-AT24 - Manual (Page 13)

13
Connections and settings
Connection
example 4
Connecting the VS-2400CD with an ADAT device and BRC
The BRC is used to operate the VS-2400CD and ADAT device in synchronization. Make
connections as shown in the diagram.
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn
off the power on all devices before making any connections.
ADAT device
VS-2400CD
DIF-AT24
BRC
R-BUS
R-BUS
ADAT OPTICAL IN
ADAT IN
ADAT OPTICAL OUT
MIDI IN
MIDI OUT
ADAT
OUT