Roland DIF-AT24 - Manual (Page 15)

15
Connections and settings
Connection
example 5
Using the DIF-AT24 as an additional MIDI OUT for the MV-8000
Make connections as shown in the diagram.
To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn
off the power on all devices before making any connections.
In order to make these connections, the MV8-OP1 (audio I/O expansion; sold separately) must be installed
in the MV-8000.
■ MV-8000 settings
1
Press the [SEQUENCE] button.
The SEQUENCE screen will appear.
2
Move the cursor to the track whose MIDI settings you want to make.
3
Press function button [F1 (Track Param)].
The TRACK PARAMETER screen will appear.
4
In the TRACK PARAMETER screen, move the cursor to “MIDI,” and select “R-1”–
”R-16” as the MIDI channel on which the track will be transmitted via R-BUS.
MV-8000
DIF-AT24
R-BUS
MIDI OUT
MIDI IN
MIDI Sound Module
R-BUS
MV8-OP1
(Audio I/O Expansion)
Settings