RCA CC543 - Manual (Page 54)

1. Attach a pow& source to the
ill between the two
3. Press EDIT-
4
V (advance) to move
the flashing c to the place you
want to begin title.
See the “Chart of Characters in Titler ‘s
Register” below for the characters
available.
5. After you have selected the first
character, press to move
the flashing cursor where you want
your next character to appear.
6. Repeat steps 4 and 5 until you have
completed the title.
7. Press TITLE SEL if you wish to create
another title on the other title page.
8. When you are finished, press TITLER
to store the title and remove the title
display from the viewfinder.
Important Note: Remember to remove the
titler graphics from the viewfinder for normal
recording.
.
3. Press TITLE SEL or TITLE SEL
until the correct character appears.
Notes: If you want to delete a title,
replace each character with a blank space.
If you want to delete a character, press
SEL + or TITLE SEL -until the
blank space appears.
in Register
A B C ' D E F G H I J K L M N O P Q R S
2 3 4 5 6 7 8 9
. (BLANK)