RCA CC543 User Manual
Page 62
Attach the wh te
on one end of
0
Attach the yellow plug on the same
the
cable to the AUDIO
end of the audio/video cable to the
IN jack on
VCR.
VIDEO IN jack on the TV or VCR.
0
3
IN jacks, attach the
Attach the yellow plug on the other
If one of
end of the audio/video cable to the
yellow VIDEO jack and the white
plug to the white AUDIO jack on the
side of the camcorder.
0
4
Place the AV
switch/to OUT.
Tapes on a VCR
1. A.
Camcorder c
directly to
TV monitor:
on the TV and
tune it to its
input channel.
2. Press and hold t e
button on the
camcorder’s PO
sliding it to VCR. Insert the cassette
you want to playback (or copy).
Note: The
camcorder can only play back
tapes recorded at the SP speed.
3. Press PLAY on the camcorder. To
copy what the camcorder is playing,
place a blank cassette in the VCR and
start the VCR recording. Adjust the
tracking on the camcorder if necessary.
Details are on page 51.
l
During playback, use the playback
features described on page 51.
4. Press
when you are
finished.
Watching What
is Seeing or Recording on the TV
1. A. Camcorder c
4
directly to
TV: Turn on the
and tune it to
its video inpu
k
B. Camcorder c
to VCR that
is already co
to TV: Turn
on VCR and
it in the “line” or
“camera” mo e .
your VCR does
not have a
e”
mode, consul
manual.) Op
normally do t
the
as you
the’ signal
coming from he
2. Press and hold the small button on the
camcorder’s POWER switch while
sliding it to CAMERA. Insert the
cassette you want to record on.
Note:
When the camcorder is used as a
camera, turn the TV’s volume down to
prevent a high-pitched squeal caused by
feedback.
3. Press the camcorder’s
to begin recording. You can
watch what the camcorder is seeing or
recording on the TV screen.
53