Radio Shack 16-3898 - Manual (Page 23)

23
Setting Date and Time
The Date/Time screen will appear when:
The camera is turned on for the first time.
The camera is turned on after removing the batteries for a long period of
time.
1. Select the item field using the / buttons.
2. Select the setting using the / buttons.
3. Press OK after all fields are set.
Choosing Language
Follow the steps below to set the OSD (On-Screen Display) language.
1. Press the MENU button.
2. Press the button to select [Setup] menu.
3. Press the / buttons to select [Language], and press OK.
4. Select the desired language using the / buttons.
5. Press OK after all fields are set.
Note:
The language setting will be retained even if the camera is turned off.
mm/dd/yyyy 12 hr
Date/Time
Date: 01 01 2005
Time: 01 01 AM
OK:Enter W or X :Select Item
S or T :Change Value