Radio Shack 16-3898 User Manual
Page 58
58
Step 2: Connect the digital camera to your computer
1. Turn on the camera.
2. Connect the larger end of the USB cable to an available USB port on
your computer.
3. Connect the small end of the USB cable to the USB socket on the camera.
4. The [USB] mode screen displays.
5. Use the / buttons to select [Pc Cam], and then press OK.
6. The message “Connected to computer” appears on the screen. Wait
for the message to disappear before using application software.
* The LCD monitor will turn off automatically for the purpose of
power-saving.
7. Mount the digital camera steadily on the top of your computer monitor
or use a tripod.
Note:
When using this digital camera as a PC camera, it is necessary to install the battery into the digital camera.
Step 3: Run your videoconferencing application software (i.e. Windows
NetMeeting)
To use Windows NetMeeting for videoconferencing:
1. Go to Start
Ж
Ж
Ж
Ж
Ж
Programs
Ж
Ж
Ж
Ж
Ж
Accessories
Ж
Ж
Ж
Ж
Ж
Communications
Ж
Ж
Ж
Ж
Ж
NetMeeting to launch the NetMeeting program.
2. Click the Start Video button to view live video.
3. Click the Place Call button.
4. Type the e-mail address or the network address of the computer that you are calling.
5. Click Call. The person that you are calling must also have Windows NetMeeting running and be
willing to accept your call to start the videoconference.
Notes:
The video resolution for videoconferencing applications is generally 320 x 240.
For more information about the operation of videoconference application software, refer to its respective help documentation.
Pc Cam
Disk Drive
USB
OK:Enter