Roadmaster Multi-Media Headunit VRVD630 - Manual (Page 13)

4
Dispose of All Batteries Properly
Turn the remote
over, then slide the
battery holder out
of the remote.
Insert battery into
battery holder with
positive side of the
battery facing up.
Insert battery
holder into the re-
mote control until
you hear a click.
Basic Operations
Changing the Battery
The remote control uses a lithium button
type battery, model CR 2025 V. Do not
use any other kind of battery in the remote.
Follow these instructions when installing or
replace the battery.
Basic Operations
Initial System Start-Up
Be sure to press the RESET button when
using the unit for the first time, after all con-
nections are completed correctly.
. Turn off the unit power.
2. Press the RESET button. The RESET
button on the housing must be activated
with either a ballpoint pen or similar point-
ed object. The RESET button is to be acti-
vated for the following reasons:
• Initial installation of the unit after all wiring
is completed.
• Some the function buttons do not oper-
ate.
• Error symbol appears on the display.
Turning Power ON and OFF
Turn on the unit by pressing button or in-
serting a disc in the DISC SLOT.
When system is on, press and hold the to
turn off the unit.
Warning LED
The LED will fl ash if the front cover is not
properly inserted into the main unit.
ESP Function
The unit features an anti-shock feature,
which buffers a certain amount of the re-
corded program into memory so that if the
unit skips due to rough road conditions,
the music or video will be uninterrupted.
The time of the buffered content varies de-
pending on the disc type:
CD, VCD ............................ 8 seconds
MP ................................. 60 seconds
DVD .....................................6 seconds
MPEG4 ..............................20 seconds
Mute Function
To turn off the sound instantly, press the
MUTE button. To return it to the prior sound
level, press MUTE again.
Mode Function
Press MODE repeatedly to switch between
DVD, AV and TUNER modes.
Adjusting the Volume Level
Rotate the Volume knob to adjust the
volume level.
Last Position Memory
• During disc playback, press and hold
the Power button to turn off the unit, when
you next turn on the unit, the DVD unit will
resume playing from the point that it was
interrupted.
• During disc playback, if you press MODE
to switch to a different mode, when you
next return to DVD mode, playback will re-
sume from the point at which it was inter-
rupted.
Radio mode is the default mode
when the unit is started without any
discs or memory.