Roadmaster Multi-Media Headunit VRVD630 - Manual (Page 22)

2
Data Disc Play Operation
When you insert a data disc containing
audio (MP), movie (MPEG4) or picture
(JPEG) files into the disc slot, the following
main menu will appear:
Artist & Song Title
(MP3 ONLY)
Track Number
Volume Level Clock
Playing Time Status
File Type
Press the TITLE button to change the
source. Press the DISP button on the re-
mote control to switch to the following in-
terface.
Information
Display
Folders List
Files List
File Type
Use the cursor buttons to navigate
the screen and the ENTER button to select
item.
Press the TITLE to switch between AUDIO,
JPG and MOVIE playback modes.
Playback type icons:
AUDIO Playback mode (default)
JPEG Playback mode
MOVIE Playback mode
In JPEG mode or MOVIE mode, press the
(STOP) to return to the main menu.
USB Playback
DO NOT CONNECT AN IPOD OR ANY
OTHER TYPE OF A/V DEVICE TO THE
USB PORT.
This disc player features a front panel USB
interface. ONLY a USB flash memory with
music or video files can be inserted into this
port. When you insert a USB flash memory
into the USB port, the DVD player will read
the USB flash memory automatically.
The unit gives priority to a disc or SD/MMC
card. If you insert a disc into the disc slot
or insert a SD/MMC card into the SD/MMC
card slot while playing from the USB de-
vice, the unit will play the disc or the SD/
MMC.
Press the button to enter PRE-STOP
mode, then press the GOTO button to
switch to the USB playback mode.
Note:
DO NOT CONNECT AN iPOD OR ANY
OTHER TYPE OF A/V DEVICE
TO THE
USB PORT.
When reading the USB flash memory,
please don’t unplug it while the unit is try-
ing to read it. If the player is unable to read
the device, check if the device is in good
condition. You may also try removing the
device fully from the port, and reinserting
it again.
• The main unit can only support the stan-
dard USB-memory format approved by
Microsoft.
Memory Card Operation (SD/MMC)
This disc player features a SD/MMC mem-
ory card slot. When you insert a SD/MMC
card into the memory card slot, the DVD
player will read the SD/MMC card auto-
matically.
The unit gives first playback priority to the
card in the slot. If you insert a disc into the
disc slot while reading the SD/MMC card,
the unit will play the disc. Press the but-
ton to enter PRE-STOP mode, then press
the GOTO button to switch back to the
card reading mode.
Note: When reading the memory card,
please don’t touch or remove the card. If
the player is unable to read the card, please
check if the card is in good condition.
You may also wish to try removing the card
fully from the reader, and re-inserting it
again.
Operation