Yamaha DVD-S700 - Manual (Page 13)

13
A
B
30˚ 30˚
7m
7
8
7
8
Remote control preparation
Battery installation )
Insert the batteries while observing the correct ( o ) and ( p )
polarities as illustrated at right.
Service life of batteries
Á The batteries normally last for about one year although this
depends on how often and for what operations the remote
control is used.
Á If the remote control unit fails to work even when it is oper-
ated near the player, replace the batteries.
Á
Use size “AA” (R6P) batteries.
Remote control operation range *
Point the remote control unit no more than about 7 m from the
remote control sensor and within about 60
u of the front of the
unit.
Á The operating distance may vary according to the bright-
ness of the room.
Notes:
Á Do not point bright lights at the remote control sensor.
Á Do not place objects between the remote control unit and
the remote control sensor.
Á Do not use this remote control unit while simultaneously op-
erating the remote control unit of any other equipment.
Remote control signal sensor
Notes:
Á
Do not use rechargeable (Ni-Cd) batteries.
Á
Do not attempt to recharge, short-circuit, disassem-
ble, heat or throw the batteries into the fire.
Á Do not drop, step on or otherwise impact the remote
control unit. This may damage the parts or lead to
malfunction.
Á Do not mix old and new batteries.
Á
If the remote control unit is not going to be used for a
long time, remove the batteries. Otherwise, electrolyte
may leak which may lead not only to malfunctioning
but also to burns if contact is made with the electro-
lyte.
Á Wipe away any electrolyte leaking inside the remote
control unit, and install new batteries.
Á
If any electrolyte should come into contact with parts
of your body, wash it off thoroughly with water.