ResMed ELITE S8 - Manual (Page 19)

15 Troubleshooting
E
ngl
ish
Technical Specifications
The manufacturer reserves the right to change these specifications without notice.
Symbols which appear on the device
Attention, consult accompanying documents; Drip proof; Type CF equipment;
Dangerous voltage; Class II equipment; Start/Stop.
Operating pressure range 4 to 20 cm H
2
O
Dimensions (H x W x D) 4.6" x 6.5" x 5.7" (112 mm x 164 mm x 145 mm)
Weight 3.1 lb (1.4 kg)
Operating Temperature +41°F to +95°F (+5°C to +36°C)
Power Supply • Input range for S8 Series II with HumidAire 3i: 100–240V, 50/60Hz;
110V, 400Hz; 2.5A <140VA (110W) (maximum power consumption).
Instantaneous peak power consumption <340VA.
• Refer to the DC-12 converter instructions for DC ratings. Only use
the ResMed DC-12 converter for DC input.
• Typical power consumption at 20 cm H
2
O is 39VA or 20.7W.
Operating Humidity 10%–95% non-condensing
Storage and Transport
Temperature -5°F to -140°F (-20°C to +60°C)
Storage and Transport
Humidity 10%–95% non-condensing
Operating Altitude Sea level to 8500’ (2591 m)
Electromagnetic
Compatibility Product complies with all applicable electromagnetic compatibility
requirements (EMC) according to IEC60601-1-2, for residential,
commercial and light industry environments. The electromagnetic
compatibility tables for these ResMed devices can be found on
www.resmed.com, on the Products page under Service and
Support. Click on the PDF file for your device.
Air Filter Two-layered, powder-bonded, polyester non-woven fibre
Air Tubing Flexible plastic, 6’ 6" (2 m)
Air Outlet The 22 mm conical air outlet complies with EN 1281-1
IEC 60601-1 Classifications Class II (double insulation), Type CF
Supplemental Oxygen Recommended maximum supplemental oxygen flow: 4 L/min
Housing Construction Flame retardant engineering thermoplastic
Noise Level Radiated sound pressure is measured at <24±2 dBA at 10 cm H
2
O and
3’3.36” (1 m) according to ISO17510-1