ResMed ELITE S8 - Manual (Page 7)

3 Setting up the S8 Series II
E
ngl
ish
Connecting the Device
Selecting the Mask Type
To ensure your device functions as intended with your selected mask, you need to
select the mask type that you are using.
1
With the RAMP or SETTLING screen displayed, press . (In CPAP mode, the
standby screen displays RAMP. In AutoSet mode (S8 AutoSet II only) the
standby screen displays SETTLING.)
2
Press until MASK is displayed.
3
Press to change the setting.
4
Press or until you see the setting that you require.
5
Press to apply.
Using the Mask-fitting Feature
You can use the S8 Series II mask-fitting feature to help you fit your mask properly. This
feature delivers air pressure for a three-minute period, prior to starting treatment,
during which you can check and adjust your mask fit to minimize leaks.
Note: Make sure that the mask setting on the MASK screen is the same as the mask you
are using.
1
Fit your mask as described in the mask user instructions.
2
With the RAMP or SETTLING screens displayed, hold down for at least
three seconds until air pressure delivery starts.
1
2
3
4
LCD and Keypad