Roberts Radio WM201 - Manual (Page 41)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Setting the auxiliary input level
Different audio sources can vary quite significantly in the strength of
the signals which they provide to other equipment such as your Internet
radio. In particular, some headphone outputs are at a much lower level
than others, and almost all headphone outputs are at a lower level than
so called 'Line-level' outputs.
So that you may use your radio with a range of external audio sources,
the input sensitivity of the Auxiliary Input may be configured to suit either
Headphone or Line-level outputs. The Headphone Level setting is the
more sensitive of the two.
1. When the radio is playing press the Select control to access the menus.
If needed, use the Back option to access the main Mode menu. Rotate
the Select control until 'Configure' is highlighted on the display.
2. Press the Select control to show the Configure menu on the display.
Rotate the Select control until 'Auxiliary input level' is highlighted.
3. Rotate the Select control until either 'Headphone level' or 'Line Input
Level' is highlighted on the display, and then press the Select control
to activate the desired setting.
4. If needed, select the Back option to exit the menu.
1-5
Aux Input Level
Backlight
Clock Setup
Radio Stations
Media Player
Auxiliary Input
Alarm clock
Configure
Off
40
Headphone Level
Line Input Level
<< Back
Headphone level
selected