Roberts Radio WM201 - Manual (Page 51)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
50
Language selection
This facility allows you to change the display language for the menus.
1. Use the Select control to switch on your radio and to access the
menus. If needed, use the Back option to access the main Mode
menu. Rotate the Select control until 'Configure' is highlighted on the
display then press the Select control to enter the Configure menu.
2. Rotate the Select control until 'Language' is highlighted then press
the Select control to access the list of available languages (English,
French, Spanish, German, Danish, Italian, Dutch, Portuguese, Finnish,
Swedish and Norwegian).
3. Rotate the Select control to highlight the desired menu language.
Press the Select control confirm your choice and to restart the radio
using the chosen language.
Software version display
The software version display is provided for your reference only.
1. Use the Select control to switch on your radio and to access the menus.
If needed, use the Back option to access the main Mode menu. Rotate
the Select control until 'Configure' is highlighted on the display.
2. Press and release the Select control to enter the Configure menu.
Rotate the Select control until 'Version' is highlighted.
3. Press and release the Select control to show the current software
version on the display. Rotating the control will display additional
information. Use the Back option to exit.
1-4
Service Pack
V257-a-297
Radio Stations
Media Player
Auxiliary input
Alarm clock
Configure
Off
Radio Stations
Media Player
Auxiliary input
Alarm clock
Configure
Off
1-3
Register
Version
Upgrade Firmware
Factory Reset
<<Back
Aux Input Level
Backlight
Language
Clock Setup