Roberts Radio Analogue World Radio R9968 - Manual (Page 11)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
11
Listening to the radio
1. Switch on your receiver by pressing the ON/OFF Sleep button.
2. The receiver will automatically tune in to the last radio station
selected.
3. The radio frequency and waveband information will show in the top
display.
4. Slide the Waveband switch to the required waveband. The
selected band is indicated in the top display.
5. Tune in to the desired station by rotating the Tuning control. The
station frequency is shown in the top display.
6. When the radio is tuned in correctly to a station, the Tuning icon
will appear in the top display.
The Telescopic antenna located on the top of your receiver is for
FM and short wave (SW) reception.
Extend and tilt the Telescopic antenna to obtain the best reception
for FM stations.
For short wave (SW) reception, adjust the Telescopic antenna
to an upright position.
For MW reception there is a built in ferrite aerial. Rotate the receiver
to the position giving the best reception.
7. Adjust the volume by rotating the Volume control.
1
4
5
7
R9968 Issue 2.pmd 10/21/2005, 2:03 PM 11