Roberts Radio Analogue World Radio R9968 - Manual (Page 14)

14
Setting the alarm to radio
1. Set the alarm time as previously described.
2. Press the On/Off Sleep button to turn the radio on.
3. Select the required waveband using the Waveband switch and
make sure that a station is tuned in.
4. Set the Volume control to the desired level.
5. Press the Alarm button. The Alarm icon will flash in the
display for a few seconds before returning to the clock display.
6. While the Alarm icon is flashing, press the Alarm button
twice to select the radio alarm mode. The Radio icon will appear
and flash in the display.
7. Press the Alarm Set button to confirm the alarm.
8. The bottom display will stop flashing, the Alarm icon and the
Radio icon will remain on the display.
9. Press the On/Off Sleep button to turn the radio off.
10. The radio alarm will sound at the preset time for 60 minutes.
11. To switch off the alarm until the next day press the On/Off Sleep
button.
12. To switch the alarm off permanently, press the Alarm button. The
Alarm icon will flash in the display for a few seconds before
reverting to the clock display.
5
2
3
4
6 7
9 11
6
R9968 Issue 2.pmd 10/21/2005, 2:03 PM 14