Roberts Radio Analogue World Radio R9968 - Manual (Page 12)

12
Setting the alarm time
The alarm is always set in local time, with the Home icon displayed.
1. Press the Alarm button. The Alarm icon will flash in the
display for a few seconds before returning to the clock display.
2. While the Alarm icon is flashing, press the Alarm button
again to select the buzzer alarm mode. The Buzzer icon will
appear and flash in the display.
3. Press and hold the Alarm Set button until the alarm time flashes
in the display.
4. Press the Hour button to change the hour.
5. Press the Min. button to change the minutes.
6. Press the Alarm Set button to confirm the correct time.
7. The bottom display will stop flashing and the Alarm icon will
remain on the display.
8. Press the 12/24 button to switch between 12 and 24 hour clock
formats. When the clock is set to 12 hour display an AM or PM
indicator will display. Make sure that the correct 12 hour cycle is
selected.
1
3 4
2
5 6
7
R9968 Issue 2.pmd 10/21/2005, 2:03 PM 12