Raymarine Radome Scanners - Manual (Page 21)

17
Display connections
The inter-unit cable is connected to the display unit with the molded plug:
the illustration on the left identifies the scanner connection on the rear
connector panels of the various display units.
If you are using an inter-unit extension cable, connect this to the display
unit, and connect the supplied cable to the extension cable.
Power connections
Power for your radome scanner when it is connected to a C or E-Series
display is supplied via the display unit - refer to the relevant display unit
Owner’s Handbook for full details.
You will need to make the following connections to your boat’s DC power
supply:
NMEA IN/OUT
DSM SEA
TALK
RAD
AR
SEA
TALK 2
SEA
TALK 2
R G Y
Scanner
C Series display
Scanner
E Series display
D8864_1
Red - Battery +ve (12/24 V)
Black - Battery -ve (0 V)
Ground
D8865_1