Regency FireGenie - Manual (Page 14)

FPI FireGenie TM Remote Control Manual 14
The “Day”, “Set Temperature” and “Prog 2” will all begin to fl ash simultaneuosly, indicating that
Copy Mode has been activated.
Pressing and releasing the “+” button will select the Day(s) of which the program is to copy to.
Pressing and releasing the “-” button will confi rm the copying process in which the original
program will copy across to the selected day(s).
8) Exiting Program Mode
There are 2 ways to exit Program Mode;
1) The Remote Control will automatically exit the Program mode 20 seconds after the last
button is released or
2) By pressing the ON/OFF button twice, the Remote Control will return to the last
operating mode.
Once the programs have been copied over to the other days of the week, the Remote Control
will automatically return to normal Program mode after the last button is released, after
approximately 20 seconds.
The next day of the week fl ashes.
2