Installing the receiver, Installing the receiver to a wall mount – Regency FireGenie User Manual
Page 15
Advertising
FPI FireGenie
TM
Remote Control Manual
15
INSTALLING THE RECEIVER
2. Connect the output cable of the
Receiver to the valve.
Refer to the unit instruction manual
for wiring details.
Installing the Receiver to a Wall Mount
a. Secure the Receiver to the wall receptacle box.
b. Use the screws provided to secure the face plate to the Receiver.
1. Make sure the slide switch on the
Receiver is at the “OFF” position.
Installation of
the Receiver to a
Junction Box
Advertising